
Vivace Boat Information Book Web Version (BIB) (Rev February 13, 2014)
Revision 6 Page | 16
Note
The old mainsail (now the spare) required special precautions to avoid
tensioning sail slides against the mast track stop screw. The
configuration of the new (2013) mainsail eliminates this concern and no
special action is required when setting the Cunningham.
9. Attach the Cunningham to the reefing ring on the mainsail port side with
the hook pointed OUT, away from the sail.
10. Close the main halyard rope clutch.
11. Hoist the mainsail. The leech may tension before the luff.
12. The vang must be carefully balanced against the halyard during re-hoist.
a. If tension on mainsail leech is too great, this indicates that the vang
is too tight and the luff cannot be fully tensioned. Ease the vang
slightly.
Cunningham hook
points AWAY FROM
sail.
Comentários a estes Manuais