Uniden WHAMx4BK Manual do Operador descarregar pdf (Página 61)

Vivace Boat Information Book Web Version (BIB) (Rev February 13, 2014)

Revision 6 Page | 61

Bilge Pumps Information

The bilge pump is a Rule 1100 gallon per hour (GPH) pump. This specification

flow is reduced to about 600 GPH in the Vivace installation that requires some

vertical lift of the bilge water to the overboard through hull. The bilge pump

circuit is protected by a fuse mounted in the bilge pump switch panel. The bilge

pump switch panel (mounted beside the circuit breaker panel) contains:

• The three-position (AUTO, OFF, MANUAL) switch

• The bilge pump fuse

• A power-on indicator light that illuminates when the pump is operating.

Except during test or maintenance tasks, the bilge pump switch is always left in

the “AUTO” position to provide automatic bilge emptying. The pump operation is

independent of battery switch position.

The bilge pump operates automatically when the switch is in the “AUTO”

position. The pump incorporates a water sensor with no moving parts that

senses water level to start and stop the pump. PSA has had several experiences

Caution

The V-berth bilge is NOT served by any bilge pump. The bilge must

be periodically checked. Water must be removed manually.

Caution

The bilge pump does not provide flooding protection when the

batteries are fully discharged or removed.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 73 74

Sem comentários

Uniden WHAMx4BK Manual do Operador Página 61